Back to previous page
Holden Commodore VE SS / HSV
23 item(s)
2006-2013
Vehicle Details
Holdens iconic SS and HSV range of commodores had a major revamp in 2003 with the introduction of the VE range. Cosmetically a complete overhaul both externally interior injected new life into the brand, accompanied by the introduction of the GM LS3 engine completely unheard of power levels for factory cars quickly became the norm.
HSV models such as the Clubsport are factory rated at 307kW, GTS at 325kW, and with the rarer editions such as the W427 rated at a staggering 375kw (503bhp).
Over the years of the VE a number of revisions are variants were released (E1, E2, E3) keeping strong support from Australian buyers and keeping things interesting for the aftermarket!
Exhaust
Empire Performance 3-inch Cat Back Exhaust - VE SEDAN
TWIN 3" Piping, Rolled 3.5" quad-tip design, Free-flowing mufflers and NO MIDDLE MUFFLER so you can actually hear your car! 2 bolt connecting flanges for bolt-on installation. Large X-Pipe to reduce drone and provide a smooth rumble. This stainless steel system unleashes the performance and sound that they should have had from the factory!
Ships from Australia
$988.90 AUD
Muffler Eliminator Pipes - 2.5-inch VE SEDAN
DIRECT Replacement for standard rear mufflers (no cutting or welding required). Easily ELIMINATE the rear mufflers to produce a great sporty exhaust note. Includes new flange gaskets.
Ships from Australia
$150.00 AUD
Rhino 2.5-inch Twin Mild Steel Exhaust System
2.5-inch high performance cat back exhaust system from Rhino Exhaust. Direct bolt on fitment to factory exhaust flanges and hanger positions, no welding or modifications required.
Ships from Australia
$580.00 AUD
Twin 3-inch Rear Section with J-Pipes
BRAND NEW 3-inch (76MM) MILD STEEL TAILPIPES WITH DUAL 3-inch ANGLE CUT TIPS. THESE PIPES GIVE YOU A GREAT NOTE, WITH REDUCED CABIN DRONE.
Ships from Australia
$400.00 AUD
DIFILIPPO Twin 3-inch Stainless Catback - VE SEDAN
DIFILIPPO DPE Grunt System in 3-inch to fit VE Sedan. FACTORY BIMODELS ON SERIES 2 CAN BE REFITTED WITH THIS SYSTEM.
Ships from Australia
$2,368.00 AUD
Stainless Steel Extractors w/ High Flow Cats - VE VF
Procomp Electronics 4 into 1 design - TUNED Design Headers. If you are looking for headers designed for maximum street performance, look no further than Procomp Electronics headers.
Ships from Australia
$622.05 AUD
Intake
MRC VCM VE Commodore Mafless OTR
MAFless to suit the 6lt and 6.2lt V8 PRE SEPTEMBER 2011 VE Commodores. The OTR can be fitted using simple hand tools in around 45mins & the kit comes with the K&N filter and all parts required for fitment. We have seen gains in standard vehicles of 30rwkw over standard, without a tune, and even more once tuned.
Ships from Australia
$579.00 AUD
Harrop Cold Air Intake
Includes all components along with upgraded performance air filter. Suits Naturally aspirated applications. Bolt on kit, easy to install (does not require bumper or headlight removal). Suits the following Vehicles. VE LS V8 6.0L L76 , L98, L77. VE HSV 6.2L LS3 /GXP LS3
Ships from Australia
$330.00 AUD
Autotechnica Cold Air Intake Kit
Increases horsepower and torque with improved throttle response. Improves fuel economy and enhances engines volumetric efficiency. Enhances intake sound (induction roar) and installs in an hour (does not require bumper or headlight removal).
Ships from Australia
$249.00 AUD
Brakes
Brembo FRONT 6 Piston Upgrade Caliper (370MM)
BRAND NEW set of RED FRONT 6-Piston Calipers to fit VE & VF Commodores (Sedan, Wagon and Ute models). Also included is a Pad Retaining Kit and set of front RDA EXTREME brake pads.
Ships from Australia
$1,990.00 AUD
Brembo Upgrade VE 06-12 Front Disc Rotors (J Type)
This sale is for a new pair (2 disc rotors) of Genuine VMAX J-Type (J-Hook Street/Track Slots) Directional Performance Slotted FRONT disc brake rotors to suit HOLDEN Commodore VE SSV With Brembo Upgrade models built 2006 till 2012 and are a direct replacement item.
Ships from Australia
$313.74 AUD
VE HSV Big Brake Kit - New/Genuine 365mm/350mm (Ute/sedan/Wagon)
GENUINE Red 4 Pot VE HSV Front calipers x 2, GENUINE Red 4 Pot VE HSV Rear calipers x 2, GENUINE Front 365mm curved slot rotors x 2, GENUINE Rear 350mm curved slot rotors x 2, Brake pads all round x 2 sets
Ships from Australia
$2,995.00 AUD
Ignition
Aeroflow Ignition Coils & Leads Kit
Aeroflow High Performance Ignition Coil Set & Aeroflow 8.5mm High Performance Ignition Leads
Suitable for VE Holden Commodore L76 L77 L98 6lt V8.
Ships from Australia
$524.95 AUD
MACE Ignition Maintenance Kit
8 X Mace Ignition coils, 8 X Autolite Double Platinum Spark plug, 8 X ICE 9mm Pro 100 Series Ignition lead
Ships from Australia
$485.00 AUD
Engine
Dart LS Next 440ci Stroker Block
This is a brand new dart Ls next block that we t/p hone cbn surface to square, debur, clean, balance rotation assembly, and set clearance and assembled all in house to a short. Dart lsnext 440ci stroker short engine, forged 4.100 inch stroke 24 or 58 tooth, Comp star rods h beam 6.125 arp2000 bolt, Wiseco forged pistons 4.125, ACL race bearing, Dart lsnext block 4.125 bore
Ships from Australia
$13,200.00 AUD
Manley Performance Stroker Kit - VE VF LS3 LSA
The assemblies feature 4340 forged steel crankshaft and H-beam connecting rods, 7/16 in. ARP 8740 cap screws with a 750 hp rating for LS engines/900 hp for big blocks, 2618 Platinum Series forged aluminium pistons, chromoly premium wrist pins, Total Seal piston rings, Clevite "H" Series narrowed rodsand "P" Series main engine bearings.
Ships from Australia
$5,650.00 AUD
Genuine Holden LS3 6.2 Litre Crate Engine Motor
Genuine HSV VE & VF LS3, brand new 6.2 litre crate engine. Comes with: clutch, pressure plate and flywheel.
Popular Items
Manley Performance Stroker Kit - VE VF LS3 LSA
Ships from Australia
$5,650.00 AUD