backArrow Back to previous page

Vehicle Details

The Mitsubishi EVO has always been a drivers car, with a basic interior yet staggering performance and capability. The 7/8/9 generations are powered by the famous 2.0L 4G63 4-cylinder with MIVEC (VVT) putting power to the ground via its AWD system with SAYC (Super Active Yaw Control) handling assist.

The EVO 9 was the last generation to carry the 4G63 motor before introduction of the 4B11, hosting a revised turbocharger upping power to 214kW in the base model, with a range of upgrade packs and models available (such as the MR and FQ series) with additional power.

Its grip, power delivery and tried and trusted 4G63 powertrain has cemented the EVO platform in the aftermarket with some of the most widespread range of mods and support of any vehicle ever manufactured.

Exhaust

thumbnail
Buddy Club Pro Spec Cat Back Exhaust
Constructed out of light weight SUS-304, the Buddy club pro Spec exhaust system is one of the lightest cat-back systems available.
Ships from Australia
$890.00 AUD
thumbnail
Unknown Performance O2 Housing (Screamer Pipe)
This o2 Dump pipe replaces the stock restrictive unit increasing flow and performance. Exhaust outlet is 2.5 with a dump screamer vent of 1.75 tube. Using thick stainless steel flanges and unit made from SUS304, this high quality unit surpasses many other cheap poor quality inferior units on the market. With high precision welding, internally ported for smooth air passage, it allows for betterflow and performance.
Ships from Australia
$429.00 AUD
thumbnail
Invidia Titanium Turbo Back Exhaust
Utilising Grade 5 pure titanium, the Invidia G5 Titan Exhaust systems ensure optimal strength and durability whilst keeping weight to a minimum. The G5 Titan systems are manufactured using state of the art mandrel bending machines to create one continuous piece.
Ships from Australia
$2,371.50 AUD
thumbnail
KS Racing Exhaust Manifold
The all new KS Racing stainless Exhaust Manifold/Headers. Includes gaskets, bolts and nuts for install.
Ships from Australia
$699.99 AUD
thumbnail
SPP V1 Turbo Exhaust Manifold
Can be used with stock EVO 4-9 Turbo, GTP712, GTP762, TOMEI ARMS, FP Turbo, HKS EVO, Zage EVO 9 etc.
Ships from Australia
$649.00 AUD
thumbnail
Invidia Dump Pipe O2 Exhaust
Invidias turbo outlet for the Evolution 7, 8, 8MR, 9 IX is designed to bolt up to the stock turbo and will mate to your stock or aftermarket downpipe.
Ships from Australia
$329.00 AUD
thumbnail
Tomei Expreme Exhaust Manifold
The material used for the piping and flange is aircraft quality SUS304 stainless steel. Along side this well developed manifold is a manifold accessory known as a heat shield. This one off in design heat shielding device is also made from durable SUS304 stainless steel.
Ships from Australia
$1,445.00 AUD
thumbnail
ETS 3-inch Exhaust System
The ETS Cat-Back Exhaust System is an effort for all out performance on the EVO. The 3.0 or 3.5” Mandrel bent stainless steel piping, and a Vibrant Performance muffler make for a performance and appearance combination that cant be beat. This system starts at the cat and tucks closely in to the driveshaft tunnel allowing near factory ground clearance. The piping expands to a full 4 before meeting the 4 muffler inlet and exits via a 4 tip at a 15 degree angle. This setup offers both race-inspired looks and ultra high performance capacity. This exhaust uses the factory rubber hangers and includes the hardware necessary for an easy, bolt on installation.
Ships from the USA
$759.00 USD

Engine

thumbnail
Frontline Fabrication Billet Valve Cover
We’re very proud of our valve covers here at Frontline Fabrication, and this new Evo valve cover is no exception. The main body of this beauty is machined from a 54lb piece of 6061 aluminum. The timing cover piece is removable via two fasteners on the top. To top things off, it includes two internally baffled -10AN ORB ports for crankcase ventilation and a -20AN ORB oil cap.
Ships from Australia
$1,495.00 AUD
thumbnail
Manley Race Intake Valves 35mm +1mm
Manley valves have set the standard for excellence in quality, material and design in the performance world for four decades. Manufactured from proven Race Master materials, Manley valves feature chrome stems, hard tips, fully machined surfaces and swirl polished radii. Many applications are Pro Flow design for maximum air flow.
Ships from the USA
$152.64 USD
thumbnail
HKS 22004-AM001 Cam Gears
HKS Cam Gears allow precise tuning of camshaft timing, which is an essential tool for optimizing engine output and when using aftermarket performance camshafts. Manufactured using durable and super light Duralumin (A2014) as its main material, the strength has increased by 50% and hardness by 30% (over previous version). This change in material has also allowed the unit to be substantially lighter (less load on engine) increasing engine reliability and power.
Ships from the USA
$479.99 USD
thumbnail
Tomei Adjustable Cam Gears
Tomei Adjustable Cam Gears For Mitsubishi Lancer Evolution 4 5 6 7 8 9
Ships from the USA
$108.00 USD
thumbnail
Tomei Complete 2.2 L Short Block
DISPLACEMENT 2158cc. PISTONS TOMEI FORGED 85.5mm. CONNECTING RODS TOMEI FORGED H-BEAM 150.0mm. CRANKSHAFT TOMEI FORGED FULLCOUNTER 94.0mm. MAIN BEARINGS TOMEI COMPETITION. CONROD BEARINGS TOMEI COMPETITION. MAIN STUDS TOMEI STRENGTHENED.
Ships from Australia
$15,200.00 AUD
thumbnail
HKS 2.3 Stroker Kit Step 2 85.5mm
This HKS high quality and authentic capacity upgrade kit provides higher engine response. HKS newly designed H-beam connecting rods for 4G63 are used. HKSnewly designed light weighted crankshaft is used to allow better engine response.
Ships from Australia
$8,207.04 AUD

Intake

thumbnail
Intake Manifold With Fuel Rail And 90mm TB
Billet Intake Flanges to Suit Mitsubishi Evo 4-9 4g63. 90mm Aluminum Throttle Body. Dual Feed Fuel Rail to Suit Full Length 14mm Top Feed Injectors. Fuel Rail Fittings to -6 including -6 center return and blank cap fitting. Vac Port Fittings.All Hardware to Assemble the Kit. Q45 bolt pattern for throttle body.
Ships from Australia
$850.00 AUD
thumbnail
Injen SP Short Ram Intake
The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. GAIN- +32.3 HP/ +24.6 FT/LB
Ships from the USA
$436.23 USD
thumbnail
ETSAir Intake Kit (Stock MAF)
he ETS Air Intake Kit is a great modification for EVOs running the stock MAF. This kit eliminates the restrictive stock rubber intake pipe and filter, and replaces them with a high flowing 3-inch intake tube, contoured velocity stack with 4.5-inch filter inlet and genuine K+N air filter. By eliminating the rubber intake tube, we get rid of the restrictive 90 degree bend that causes turbulence right in front of the turbo inlet. With this bend gone and with a large radius 3-inch inlet, the air now has a smooth, direct path into the turbocharger. This not only increases peak power, but reduces spool up time as well. This kit works with stock and aftermarket intercooler piping, and will work with all aftermarket BOVs that fit the stock intake tube. Typical power gains are 10-20hp depending upon boost level and engine modifications.
Ships from the USA
$249.00 USD
thumbnail
Tomei Turbo Suction Intake Hose
The enlarged turbo suction hose features a capacity of 140% vs the stock setup! In addition , maximizing the direct air flow route and smoothing the bends allows for a dramatic improvement in air flow efficiency to the turbo resulting in a significant performance increase. The 140% capacity is achieved by maximizing the diameter of the hose which tapers down smoothly to 64mm just before the turbo inlet to keep it compatible with the stock turbo.
Ships from the USA
$200.00 USD

Transmission

thumbnail
Pfitzner (PPG) 1st To 5th Grp-n V3 Gear Set
Incorporating the same tooth profile design techniques as their famous 1100hp rated EVO1-3 drag sets, the EVO 4-9 V3 GRP-N gear sets have maximum power handling characteristics given the FIA Group N Homologation restrictions. Gear sets comes with billet Chromoly Selector Forks and matching Final drive assemblies (4.307). Ratios: 3.0 / 2.0 / 1.47 / 1.111 / .857 FD: 4.307. Horsepower Rating: 700 hp
Ships from the USA
$9,596.50 USD
thumbnail
Exedy MM022HR Racing Hyper Multi Series
Hyper Multi-Plate Clutch Kit. Triple Cerametallic. Rigid Disc 200mm. Pull Type. 23 Tooth/26.4mm Spline. Wheel Torque Rating 923 ft./lbs. 2653 lbs. Clamp Load.
Ships from the USA
$2,751.04 USD
thumbnail
Driveshaft Shop 1000hp+ Rear Axles Hub Kit
his is the new DSS Pro-Level Rear Axle/Hub kit for the Evo VII / VIII / IX. This is the strongest axle kit we make for the Evo, rated to 1200whp with a 1 year warranty. This kit includes axles, hubs, wheel bearings and studs as found on our Level 5 kit, but the axles feature larger 36 spline bars (instead of 32 spline on the Level 5) and our new Ball & Cage inner CV.
Ships from the USA
$2,249.00 USD
thumbnail
OS Giken MT031-AA8 Clutch
Our Super Single Clutch series is an ideal choice as a replacement to the original equipment clutch and flywheel and provides your vehicle with quicker response and higher performance. The Super Single Clutch is designed with the same high-quality materials and strict manufacturing processes as our Racing Multi-plate Clutch line.
Ships from the USA
$1,706.47 USD
thumbnail
Mantic Track Clutch Kit & Flywheel
This system features a sprung centre cushioned segmented cerametallic clutch disc that offers a level of performance above organic discs, while offering little compromise in driving style and vehicle usage. Designed to be used both on the street and for track or motor-sport applications. The street twin cerametallic disc can hold over 1000Nm of torque.
Ships from Australia
$2,217.60 AUD

More parts everyone should have