Back to previous page
Toyota Supra (4th GEN - JZA80)
40 item(s)
1993-2002
Jump to Category
Vehicle Details
The infamous 4th generation Supra is an icon of the JDM era - It featured completely redesigned engine packages; a naturally aspirated Toyota 2JZ-GE (164 kW / 285 Nm), and a twin turbocharged Toyota 2JZ-GTE (206 kW / 431 Nm).
The turbocharged version is capable of accelerating 0-100km/h in 4.6 seconds and has a tested top speed of 285 km/h (177 mph), however due to factory restrictions are limited to 180km/h in Japan, and 250 km/h in worldwide markets.
The twin turbochargers operate in sequential mode to increase torque, with nearly 400Nm of torque available by 1800rpm. Power is delivered through a new six-speed Getrag/Toyota V160 gearbox, or 4 speed A340E automatic transmission.
Exhaust
Tomei Expreme Titanium Exhaust System (JZA80)
Tomei Expreme Titanium Exhaust System for 1993-02 Toyota Supra 2JZGTE JZA80. High performance and super lightweight design. Unleash the full potential of your legendary Toyota Supra Twin Turbo MK IV with the new FULL TITANIUM Muffler SYSTEM.
Ships from the USA
$981.00 USD
Downpipe 3 Inch Stainless (2JZ)
Tig welded stainless 3 inch dump pipe, with a v-band flange at the turbo and 2 bolt flange after the flex joint. Includes an O2 Sensor bung.
Ships from the USA
$990.00 USD
REV9 Exhaust Manifold (T4)
A top mount ported and polished exhaust manifold in SUS321 stainless steel, flanged for T4 turbos with external wastegate flange supporting up to 50mm units.
Ships from the USA
$152.99 USD
DOCrace VBAND Exhaust Manifold
The DOC Race Topmount Turbo Manifold is for the more extreme setup looking for the potential limit of the vehicles engine. This manifold has seen well over 1000hp and is designed for peak-power situations. The DOC Topmount manifold can still be used for “streetable” vehicles, but is solely designed to make maximum horsepower and allow you to fit much larger frame turbo’s then a traditional ramhorn. Fits Tial 44mm wastegates and up to GT42R sized turbos with a 4 inch downpipe.
Ships from the USA
$2,514.75 USD
DOCrace T4 Divided Exhaust Manifold
The DOC Race Topmount Turbo Manifold is for the more extreme setup looking for the potential limit of the vehicles engine. This manifold has seen well over 1000hp and is designed for peak-power situations. The DOC Topmount manifold can still be used for “streetable” vehicles, but is solely designed to make maximum horsepower and allow you to fit much larger frame turbo’s then a traditional ramhorn. Fits Tial 44mm wastegates and up to GT42R (PTE8285) sized turbos with a 4 inch downpipe.
Ships from the USA
$1,695.00 USD
6BOOST Exhaust Manifold (T4)
T04 Dual Entry Turbine Inlet Flange
Suits all 2JZ engines and T4 turbocharger and external wastegate. This manifold suits 45mm, 50mm and 60mm wastegates. Steampipe design with equal length runners, and ceramic coated to keep temps under control.
Ships from Australia
$1,300.00 AUD
HP-Series Equal Length Exhaust Manifold (T4)
The Rev9 HP-Series Equal Length T4 Turbo Manifold is engineered to develop the highest level of power. Designed with equal length runners from entry to exit for maximum flow to result in quicker spooling time. Made from high-quality T304 stainless steel with TIG brass style welds to ensure durability and develop the highest level of power.
Ships from the USA
$419.99 USD
Intake
Hypertune Intake Manifold - 12 Injector Big Port
This manifold has been developed, tested and proven to be suitable for engines producing over 2000hp. Includes two rails for 12 injectors, port size, runner geometry and inlet profile have been optimised to maximise flow potential while still providing impressive midrange torque characteristics. Direct fit without modification. Even when used in more mild applications, the high port efficiency and excellent cylinder distribution guarantee impressive performance.
Ships from Australia
$2,800.00 AUD
SupraStore Kings Royal Chamber Intake Manifold (BLACK)
Package includes the SupraStore Kings Royal Chamber 2JZ-GTE Intake Manifold, a 90mm throttle body, 14mm Fuel Rail and all mounting hardware.
Ships from the USA
$999.00 USD
Zerofab Billet Intake Manifold with 90mm Throttle Body
Complete intake manifold package including, 1 xProFlow BILLET 2JZ-GTE Manifold V1, a 90mm Billet Throttle Body, 14mm Injector 3-Port Fuel Rail to suit -6 to -10 fittings (-6 included), All mounting hardware, O-Rings for IACV and Throttle body, 3/8 and 1/8 NPT fittings, Throttle cable brackets and all Mounting Hardware.
Ships from the USA
$629.99 USD
Suspension
Fortune Auto Coilovers - 500 Series (JZA80)
The Fortune Auto 500 Series to suit JZA80 MK4 Supra utilises high quality components that meet strict standards to optimize comfort, reliability, and longevity. Digressive piston technology allows for stiff low-speed compression/rebound force. This gives more control of driver inputs such as roll, dive, and squat. However, at fast stroke speeds becomes supple in response to bumps and irregularities in the road for maximum control.
Ships from the USA
$2,465.00 USD
K-Sport Coilover Kit - Toyota Supra JZA80
New coilover kit to suit Toyota Supra JZA80. Fully adjustable suspension with 33 levels of dampening and rebound, plus height adjustable. Very comfortable ride that can give you remarkable handling for the street or track.
Ships from Australia
$1,268.00 AUD
Tein Flex Z 16 Way Adjustable Coilovers
Teins new Z FLEX series to suit JZA80 with 14kg front 8kg rear spring rates. Full height adjustment, separate spring preload and height settings, 16-way damping force adjustment using our Advance Needle technology for a much wider range of damping force adjustment per click (~ 200% increase in damping force adjustment range over our previous needle design), Compatible with EDFC.
Ships from the USA
$859.00 USD
BC Racing BR Series Adjustable Suspension Coilovers
BC Racing BR Type Coilover perfect for street driving and occasional road course duty. Spring rates 14kg front, 10kg rear to suit Supra MK4.
Ships from the USA
$995.00 USD
Rev9 Hyper-Street II 32 Level Damping Coilover - Supra MK4
Hyper-Street II coilover suspension featuring mono-tube shocks with 32 clicks rebound settings and full length adjustable. Spring rates 14kg front and 10kg rear to suit MK4 Supra.
Ships from the USA
$497.00 USD
Godspeed MonoRS Coilovers for MK4 Toyota Supra
Spring rates: Front: 12 kg/mm / Rear: 8 kg/mm. 32 precise levels of damper adjustment. Koyo Japan 6204z bearing
Polyurethane bushings.
Ships from the USA
$740.00 USD
Tein S-Tech Springs Mk4 Supra 93-98
Front and rear Tein S-Tech lowering springs, a fitting balance between ride height and performance with a 1.1 inch Front and 1 inch Rear Drop over stock.
Ships from the USA
$312.00 USD
ECU
AEM Series 2 EMS ECU for Toyota Supra MK4
This is a standalone AEM Series 2 plug and play ECU for 93-97 Toyota Supra Turbo applications. For use with all factory sensors and extendable for upgraded or additional sensors where necessary.
Ships from the USA
$2,065.41 USD
Haltech Elite 2500 ECU With Adaptor Harness Kit
Plug and play Haltech Elite 2500 ECU package to suit JZA80 2JZ MK4 Supra with non VVTI manual transmission single turbo conversion.
Ships from the USA
$2,232.00 USD
Engine
CP Forged Pistons (Options from 8.5:1 to 10:1)
A complete set of 6 x 2JZGTE CP forged pistons available in a variety of bore compression ratio options ranging from 8.5:1 to 10:1. Wrist pins and locks are included.
Ships from the USA
$1,018.50 USD
2JZGTE 3.4L Winberg Stroker Kit
This is a complete custom stroker kit that has everything you need for a 2000+ HP 2JZ build. This kit is balanced & blue printed ready to install. No need to have a machine shop measure & spec out the correct parts we have already done that. Includes 2JZ billet Winberg 3.4 L stroker crank, Pauter billet X-beam rods, JE forged pistons & rings, Extreme duty wrist pins
and King HP bearings.
Ships from the USA
$14,950.00 USD
TOMEI Adjustable CAM Gears (1JZ/2JZ)
Super lightweight 100% Duralumin
Duralumin is alloy of aluminum (over 90%) with copper (about 4%), magnesium (0.5%-1%), and manganese (less than l%).
Ships from Australia
$211.12 AUD
ATI Super Damper Crank Pulley (MK4 2JZGTE)
On damper assembly #918562, the serpentine grooves are in the OEM location. Requires longer belt: 15% OD, OEM, 6 rib. (Use Gates #K060775)
Ships from the USA
$390.67 USD
Exterior
Rear Roof Spoiler Window Wing
Improve both aerodynamics and appearance with this rear roof spoiler wing. Easy fitment with no drilling or cutting required.
Ships from the USA
$76.30 USD
T-Style Carbon Fiber Rear Trunk Spoiler
Toyota Supra MK4 T-style rear wing with the center blade in Carbon Fiber, and side stands in FiberGlass (unpainted black).
Ships from the USA
$1,229.00 USD
VIS Carbon Fiber Hood (JGT 2)
Direct replacement for factory hood in lightweight carbon fiber.
Ships from the USA
$1,200.00 USD
VIS Carbon Fiber Hood (V LINE)
Direct replacement for factory hood in lightweight carbon fiber.
Ships from the USA
$1,300.00 USD
VIS Carbon Fiber Hood (TERMINATOR)
Direct replacement for factory hood in lightweight carbon fiber.
Ships from the USA
$1,200.00 USD
Fueling
Radium Engineering 3 Pump Fuel Hanger
Drop-In OEM Replacement. Holds 1-3 Fuel Pumps. 8AN Male Pump Outlet. 6AN Male Return Inlet. Fuel Starvation Protection. High Current Electrical Hardware. Compatible with Various Pumps. Anodized Aluminum Construction.
Ships from the USA
$522.44 USD
Dual Walbro 400lph Fuel Pump Hanger (-10AN)
CNC Machined Toyota Supra 93-98 Intank Dual Fuel Pump Hanger Kit. Fuel pump hanger has anodized coating making it e85/alcohol compatible .This is must for those that want to produce 700+RWHP. This kit can be used with 1 or 2 fuel pumps of your choice with a 39mm diameter. Comes with 2 x AN6 male fittings and 1x AN10 male feed fitting.
Ships from the USA
$279.99 USD
2200cc Bosch EV14 Injectors + RADIUM Top Feed Rail
Listing includes Radium 2JZGTE top-feed Fuel rail kit featuring a large 0.69" internal diameter bore, and a set of 6 Bosch EV14 2200cc fuel Injectors. This kit is compatible with all fuel types including popular alcohol mixtures such as E85. All ports are tapped with 3/4"-16 female threads (-8AN ORB).
Ships from the USA
$989.99 USD
1000cc Bosch EV14 Fuel Kit
Listing includes a set of 6 x Bosch ev14 1000cc fuel injectors, high flow fuel rail kit, and plug and play injector connectors. Injectors will fit factory injector harness with included adapters. No cutting or modifying injector harness needed.
Ships from the USA
$589.99 USD
Mounts
MEGAN Racing Engine Mounts
Designed for Toyota Supra JZA80 2JZ-GTE 1993-95. Constructed of hardened rubber to give a more solid connection between the drivetrain and chassis.
Ships from the USA
$189.96 USD
TRD PTR04-0004 Engine Mounts (Pair)
Pair of brand new TRD engine mounts for the Toyota Supra & Soarer with 2JZ-GTE engines.
Popular Items
Short Shift Kit (6-speed 93-02 JZA80)
Ships from the USA
$49.00 USD